Marvel 60CIM-SS-F Guía para resolver problemas

InstallationOperationandMaintenanceInstructionsTall Door Clear Ice Models30iMT30iMAT3OiMTMARVEL

DIMENSIONS FOR 30iMT SOLID OVERLAY DOORRough In Opening Dimensions, for 30iMT Solid Overlay Door15” (38.1 cm)*24” (61 cm)standard cabinet depth* Dept

DIMENSIONS FOR 30iMAT SOLID DOORRough In Opening Dimensions, for 30iMAT Solid Door15” (38.1 cm)*24” (61 cm)standard cabinet depth* Depth dimension ma

DIMENSIONS FOR 30iMAT SOLID OVERLAY DOORRough In Opening Dimensions, for 30iMAT Solid Overlay Door15” (38.1 cm)*24” (61 cm)standard cabinet depth* De

12FULL OVERLAY PANEL INSTALLATION INSTRUCTIONSStep 1: Verify door alignmentThe door should be parallel to the sides and top of the refrigerator. If al

FULL OVERLAY PANEL INSTALLATION INSTRUCTIONSStep 6: Drill holes in overlay panelRemove the hinge adapter bushings from the top and bottom door hinge a

14FULL OVERLAY PANEL INSTALLATION INSTRUCTIONSStep 9: Secure overlay panel to the door.With the #8 wood screws provided fasten the overlay panel to th

OPERATION, CARE, AND CLEANING OF YOUR ICE MACHINEOperation (Turning on the ice machine)Once the drain and water supply are hooked up, and the ice mach

OPERATION, CARE, AND CLEANING OF YOUR ICE MACHINE1611. Clean the ice machine’s interior, ice scoop, interior door panel and door gasket with mild soap

FILLER PANEL KIT INSTALLATION INSTRUCTIONS (Optional)Optional Filler Panel kit includes the following:quantity. 2 Cabinet Extensionsquantity. 2 Kick p

TROUBLESHOOTING GUIDEPROBLEM POSSIBLE CAUSE CORRECTIONUnit does not operate.1. The unit is unplugged. Plug in the unit.2. Breaker is tripped or fuse i

1TABLE OF CONTENTSUnpacking your ice machine...2 Removing the packaging...

TROUBLESHOOTING GUIDE19PROBLEM POSSIBLE CAUSE CORRECTIONIce cubes are too small (less than 1/2 inch thick).1. Low ice consumption.Ice is slowly meltin

TROUBLESHOOTING GUIDE20PROBLEM POSSIBLE CAUSE CORRECTIONIce is not clear.1. Low water level in reservoir.Make sure that the reservoir drain plug is in

TROUBLESHOOTING GUIDE21PROBLEM POSSIBLE CAUSE CORRECTIONIce cubes are sticking together.1. Ice consumption is low.Use the ice in the bin frequently.

22PREPARING THE ICE MACHINE FOR STORAGEIf the ice machine is moved, not used for an extended period of time, or will be in an area that will be near f

Before Calling for ServiceBefore calling for service, check the following items:Make sure unit is plugged into outlet.•Check the outlet for power. T

HOUSEHOLD PRODUCT WARRANTYParts or ServiceNot Supplied or Designated by MarvelThe above warranties also do not apply if:The original bill of sale, del

NOTES25

NOTES26

All specifications and product designs subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvement

UNPACKING YOUR ICE MACHINE2Remove PackagingYour ice machine has been packed for shipment with all parts that could be damaged by movement securely fas

3INSTALLING YOUR ICE MACHINESelect LocationThe proper location will ensure peak performance of your appliance. We recommend a location where the unit

INSTALLING THE DRAIN PLUMBINGDrain PlumbingYour ice machine uses a gravity drain (Figure 3) that re-quires 5/8” I.D. tubing from the back of the ice m

The Marvel Drain Pump is designed to remove drain water from ice machines installed in areas without direct drain-age access. The sealed reservoir pu

30iM InstallationTurn the ice machine to gain access to the rear of the 1. unit. Remove the access panel by removing the ten (10) screws (see Figure

Water SupplyThe ice machine must be connected to a potable, active cold water supply line delivering water pressure at a mini-mum of 20 psi and a maxi

DIMENSIONS FOR 30iMT & 3OiMT SOLID DOORRough In Opening Dimensions, for 30iMT & 3OiMT Solid Door15” (38.1 cm)*24” (61 cm)standard cabinet dep